Steam
Products
Division
Category
Type
Material
Connection
Brand
Design
Search
TOSACA | 1216 SAFETY RELIEF VALVE
Material
Stainless Steel
Sizes
1/2″ to 2″
Connection
Threaded
Pressure
40 Bar Rated
MMT ITALIA | SERIES 710 CONTROL ACCESSORIES & LEVEL PROBES
Material
Stainless Steel
Sizes
1″
Connection
Threaded
VALSTEAM ADCA UD720 | UNIVERSAL DISPLAY
The UD-720 is a programmable digital panel display used for the measurement of standard sensor and…
Sizes
93 x 96 x 48 mm
VALSTEAM ADCA UC820 | UNIVERSAL PROCESS CONTROLLER
The UC-820 is a digital universal controller used in the automation of industrial processes. It is…
Sizes
101 x 48 x 96 mm
MMT ITALIA | SERIES 395 CONTROL ACCESSORIES & LEVEL PROBES
Single Electrode Holder
Material
Stainless Steel
Sizes
3/8″
Connection
Threaded
VALSTEAM ADCA SPS-21 | CONDUCTIVITY PROBE
The ADCATROL SPS-21 conductivity probe is used to measure the conductivity (TDS) of the superheated water…
Material
Stainless Steel
Sizes
1/2″
Connection
Threaded
Pressure
32 Bar Rated
MMT ITALIA | SERIE 230 & 231 CONTROL ACCESSORIES & LEVEL PROBES
SIL Electronic self testing conductivity level alarm and block for maximum level
Material
Stainless Steel
Connection
Threaded
VALSTEAM ADCA PCS1 | PRESSURE TRANSMITTER
The ADCATrol PCS1 is a series of pressure transmitters suitable for all industrial applications. It is…
Material
Stainless Steel
Sizes
1/4″
Connection
Threaded
Pressure
0 to 600 Bar Rated
VALSTEAM ADCA SPS-33 | CONDUCTIVITY PROBE
The ADCATrol SPS33 conductivity probe is typically used in steam applications to measure the conductivity of…
Material
Stainless Steel
Sizes
1/2″
Connection
Threaded
Pressure
32 Bar Rated
MMT ITALIA | SERIES 203 CONTROL ACCESSORIES & LEVEL PROBES
DIN Rail Conductivity Level Switch
Material
Stainless Steel
Connection
Threaded
VALSTEAM ADCA PC25 | ELECTRO-PNEUMATIC CONVERTER
The ADCATrol PC25 is a compact device which converts a standard analog signal to a standard…
Sizes
1/4″
Connection
Threaded
Pressure
5 Bar Rated
VALSTEAM ADCA P10 | AIR FILTER REGULATOR
The P10 air filter regulators are used to remove both solid and liquid impurities from the…
Sizes
1/4″
Connection
Threaded
Pressure
12 Bar Rated
VALSTEAM ADCA TRPT1 | TEMPERATURE SENSOR
The TRPT1 Pt100 resistance temperature sensors are specially designed for general industrial use. The sensing element…
Material
Stainless Steel
Sizes
1/2″
Connection
Threaded
Pressure
36.5 Bar Rated
VALSTEAM ADCA BCS220 | BL0WDOWN CONTROLLER
The ADCATrol BCS220 is a blowdown controller specially designed for use with steam boilers. The device…
Sizes
150 x 161 x 119
MMT ITALIA | SERIES 800 CONTROL ACCESSORIES & LEVEL PROBES
Safety level probe for steam and hot water boilers
Material
Stainless Steel
Sizes
1/2″ to 3/4″
Connection
Threaded
MMT ITALIA | SERIES 452 & 453 CONTROL ACCESSORIES & LEVEL PROBES
Continuous level transmitter for high temperatures.
Material
Stainless Steel
Sizes
1/2″
Connection
Threaded
VALSTEAM ADCA SV32 | DIRECT SOLENOID VALVE
3/2 way solenoid valves are available as single station units and they are designed for use…
Sizes
1/4″
Connection
Threaded
Pressure
10 Bar Rated
TOSACA | 1415 LP SAFETY RELIEF VALVES
Safety relief valves with a complete range of sizes ½ to 20″”, rating until ANSI 2500,…
Material
Carbon Steel, Duplex, Stainless Steel
TOSACA | 1216C SAFETY RELIEF VALVE
Safety and relief valves, angle type, Conventional direct spring loaded Full lift safety valve
Material
Stainless Steel
Sizes
1/2″ to 2″
Connection
Clamp
Pressure
PN10
VALSTEAM ADCA POPS-KT TRIPLEX | PACKAGED AUTOMATIC PUMPS PRESSURE OPERATED CONDENSATE PUMPING UNITS
The POPS-K packaged pump units can be used to lift or displace hot condensate and other…
Material
Carbon Steel, Stainless Steel
Sizes
DN50 – DN80
Connection
Flanged, Threaded
Pressure
PN16
VALSTEAM ADCA POPS-KD DUPLEX | PACKAGED AUTOMATIC PUMP
The POPS-K packaged pump units can be used to lift or displace hot condensate and other…
Material
Carbon Steel, Stainless Steel
Sizes
DN50 – DN80
Connection
Flanged, Threaded
Pressure
PN16
VALSTEAM ADCA POPS-K SIMPLEX | PACKAGED AUTOMATIC PUMPS PRESSURE OPERATED CONDENSATE PUMPING UNITS
The POPS-K packaged pump units can be used to lift or displace hot condensate and other…
Material
Carbon Steel, Stainless Steel
Sizes
DN25 – DN80
Connection
Flanged, Threaded
Pressure
PN16
VALSTEAM ADCA FRECO | FLASH STEAM HEAT RECOVERY UNIT
The ADCATherm FRECO flash steam heat recovery units are designed to facilitate heat recovery from flash…
VALSTEAM ADCA ECRUV | ELECTRIC CONDENSATE RECOVERY UNIT
The ADCAMat ECRUV series electric condensate recovery units are recommended in the transfer of high-temperature water…
Material
Carbon Steel, Cast Iron, Stainless Steel
VALSTEAM ADCA ECRU | ELECTRIC CONDENSATE RECOVERY UNIT
The ADCAMAT ECRU series electric condensate recovery units are recommended in the transfer of high-temperature water…
Material
Carbon Steel, Stainless Steel
Sizes
225L – 850L
VALSTEAM ADCA BFT | BOILER FEED TANK
The BFT boiler feed tank is one of the most important devices in a boiler room….
Material
Carbon Steel, Stainless Steel
Sizes
537l – 5943l
Connection
Flanged, Threaded
VALSTEAM ADCA STS | SHELL AND TUBE HEAT EXCHANGER
The ADCA STS series steam to water shell and tube heat exchangers are shorter and lighter…
Material
Stainless Steel
Connection
Flanged, Threaded
Pressure
PN16, ANSI 150
VALSTEAM ADCA PPO14 | PRESSURE OPERATED PUMP
The ADCAMat PPO14 pressure operated pump is recommended in the transfer of steam condensate, oils and…
Material
Carbon Steel, Stainless Steel
Sizes
DN25 x DN25, DN40 x DN40,…
Connection
Flanged, Threaded
Pressure
PN16, ANSI 150
VALSTEAM ADCA M3HP | HYGIENIC BALL VALVE
The ADCAPure M3HP three piece body ball valves are isolating valves designed for use with clean…
Material
Stainless Steel
Sizes
21/2″ – 4″, DN65 – DN100.
Connection
Clamp, Welded
Pressure
PN40
VALSTEAM ADCA P160G | SANITARY PRESSURE REDUCING VALVE
The ADCAPure P160G is a series of angle design direct acting diaphragm sensing pressure reducing valves….
Material
Stainless Steel
Sizes
21/2″ – 3″
Connection
Butt Weld, Clamp
Pressure
PN10