Flanged Special Equipment
Category
Steam | Special Equipment
Material
Connection
Flanged
Design
Pressure
Size
Brand
VALSTEAM ADCA STS | SHELL AND TUBE HEAT EXCHANGER
The ADCA STS series steam to water shell and tube heat exchangers are shorter and lighter…
Material
Stainless Steel
Connection
Flanged, Threaded
Pressure
PN16, ANSI 150
VALSTEAM ADCA RVST | FLASH VESSEL WITH STEAM TRAP
The flash vessel is the main component in any flash recovery system. It can be used…
Material
Carbon Steel, Stainless Steel
Connection
Flanged
Pressure
PN16
VALSTEAM ADCA LIPO | LIFITNG POT
The ADCA LIPO series of condensate lifting pots were designed for installation in steam and condensate…
Material
Carbon Steel, Stainless Steel
Sizes
DN15 – DN100
Connection
Flanged
Pressure
PN16, PN40, ANSI 150
VALSTEAM ADCA EH | EXHAUST HEAD
The EH series exhaust heads were designed to protect personnel from injury and exterior of buildings…
Material
Carbon Steel, Stainless Steel
Sizes
DN25 – DN250
Connection
Flanged
Pressure
PN16, ANSI 150
VALSTEAM ADCA R SERIES | TUBULAR HEATING COIL
The ADCA R series steam to water tubular heating coils are shorter and lighter than the…
Material
Carbon Steel, Stainless Steel
Connection
Flanged, Threaded
Pressure
PN16, ANSI 150
VALSTEAM ADCA STV | VERTICAL SHELL AND TUBE HEAT EXCHANGER
The ADCA ST series steam to water shell and tube heat exchangers are shorter and lighter…
Material
Carbon Steel, Stainless Steel
Connection
Flanged, Threaded
Pressure
PN16, ANSI 150
VALSTEAM ADCA MAS | STEAM DISTRIBUTION MANIFOLD
The MAS series steam distribution manifolds are essentially designed to allow the placement of steam supply…
Material
Carbon Steel, Stainless Steel
Sizes
DN100 – DN300
Connection
Flanged, Threaded
Pressure
PN16, PN40, ANSI 150, ANSI 300
VALSTEAM ADCA STH | HORIZONTAL SHELL AND TUBE HEAT EXCHANGER
The ADCA ST series steam to water shell and tube heat exchangers are shorter and lighter…
Material
Carbon Steel, Stainless Steel
Connection
Flanged, Threaded
Pressure
PN16, ANSI 150
VALSTEAM ADCA RV | FLASH VESSEL
The flash vessel is the main component in any flash recovery system. It can be used…
Material
Carbon Steel, Stainless Steel
Connection
Flanged
Pressure
PN16
VALSTEAM ADCA PWHU | PACKAGED WATER HEATING UNIT
The ADCATherm PWHU packaged water heating units are designed for instant hot water heating in a…
Material
Carbon Steel, Stainless Steel
Connection
Flanged
Pressure
PN16, ANSI 150
VALSTEAM ADCA DSH | DIRECT STEAM INJECTION HUMIDIFIER
The ADCA DSH series of direct steam injection humidifiers are designed to ensure highly efficient and…
Material
Stainless Steel
Sizes
1/2″ – 11/4″
Connection
Flanged, Threaded
VALSTEAM ADCA AS | AIR & DIRT SEPARATOR
The AS series centrifugal air and dirt separators are designed to be used in the flow…
Material
Carbon Steel, Stainless Steel
Sizes
DN32 – DN300
Connection
Flanged, Threaded
Pressure
PN16, ANSI 150
VALSTEAM ADCA HCC | HOT CONDENSATE COOLER
The HCC is a cooling device that allows the mixing of hot condensate with a lower…
Material
Carbon Steel, Stainless Steel
Sizes
DN20 – DN40
Connection
Flanged
Pressure
PN16, PN40, ANSI 150, ANSI 300
VALSTEAM ADCA PAT | PLATE HEAT EXCHANGER
The ADCATherm PAT plate heat exchangers (gasketed and bolted), consist of a variable number of pressed…
Material
Carbon Steel, Stainless Steel
Connection
Flanged, Threaded
Pressure
PN10, ANSI 150