PRESSURE SUSTAINING VALVES
![PS130](images/products/ps130.png)
PS130
The ADCA PS130 series direct-acting, spring-loaded diaphragm sensing, pressure sustaining valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve design. This valve is specifically designed for the high purity gas systems found in the pharmaceutical cosmetic, fine chemical and food & beverage processes.
MATERIAL
Stainless steel
SIZES
1/2 to 1 DN 08 to DN 25
CONNECTIONS
ASME BPE, DIN and ISO clamp ferrules or
tube weld (ETO) ends
MAX. UPSTREAM PRESSURE
8 bar
MAX. DESIGN TEMPERATURE
150 ēC
REGULATING RANGE
0,2 to 8 bar
FLOW RATE COEFFICIENTS
Kvs 1,7 or 3
![PS161](images/products/ps161.png)
PS161
The ADCAPure PS161 is a series of angle design direct acting diaphragm sensing pressure sustaining valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials and valve design.
MATERIAL
Stainless steel
SIZES
1/2 to 2 ; DN 15 to 50
CONNECTIONS
ASME BPE, DIN and ISO clamp ferrules
or tube weld (ETO) ends
MAX. UPSTREAM PRESSURE
8 bar
MAX. DESIGN TEMPERATURE
180 ēC
REGULATING RANGE
0.8 to 8 bar
FLOW RATE COEFFICIENTS
Kvs 1.3 to 13.0
![PS163](images/products/ps163.png)
PS163
The ADCAPure PS163 is a series of direct acting diaphragm sensing pressure sustaining valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials and valve design.
MATERIAL
Stainless steel
SIZES
1/2 to 2 DN 15 to 50
CONNECTIONS
ASME BPE, DIN and ISO clamp ferrules
or tube weld (ETO) ends
MAX. UPSTREAM PRESSURE
8 bar
MAX. DESIGN TEMPERATURE
180 ēC
REGULATING RANGE
0.8 to 8 bar
FLOW RATE COEFFICIENTS
Kvs 1.3 to 13
![PS173](images/products/ps173.png)
PS173
The ADCA P173 series direct-acting, spring-loaded diaphragm sensing, pressure reducing valves are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials.
MATERIAL
Stainless steel
SIZES
11/2, 2 DN 32 to DN 50
CONNECTIONS
ASME BPE, DIN and ISO clamp ferrules
MAX. UPSTREAM PRESSURE
8 bar
MAX. DESIGN TEMPERATURE
150 ēC
REGULATING RANGE
0,8 to 8 bar
FLOW RATE COEFFICIENTS
Kvs 5,5 to 8,5