FILTERS
ISC16
The ISC16 high-efficiency filters are used to remove contaminated particles from gases such as steam and compressed air. The optimized construction of these units offers low differential pressure at high flow rates. All sizes are built in two halves. Up to 3 / DN 80, they are joined by a food industry fitting according to DIN 11851 and the larger sizes DN 100 to DN 200 by flat flanges fixed with bolts and nuts.
SIZES
1/4 to 3 DN 10 to DN 80
CONNECTIONS
Female threaded ISO 7 Rp or NPT
Flanged EN PN 16
Flanged ASME Class 150
MAX. OPERATING PRESSURE
10 bar @ 200 ēC
ISC20I
The ISC20i high efficiency filters are used to remove contaminated particles from gases such as steam and compressed air. The optimized construction of these units offers low differential pressure at high flow rates. All sizes are built in two halves, with 1/4" to 3" being joined by a sanitary clamp ferrule according to DIN 32676 Series A. Whereas 4" to 6" are joined by bolts and nuts. All sizes include plugged drain and vent connections. The replaceable filter elements are made of sintered austenitic stainless steel and available with 1, 5 or 25 micron absolute rating.
SIZES
1/4 to 6 DN 10 to DN 150
CONNECTIONS
Female threaded ISO 7 Rp or NPT
Flanged EN 1092-1 PN 16
Flanged ASME B16.5 Class 150
MAX. OPERATING PRESSURE
up to 16 bar
MAX. OPERATING TEMPERATURE
up to 200 ēC
ISH10I
The ISH10I high-efficiency filters are used to remove contaminated particles from gases such as steam and compressed air. The optimized construction of these units offers low differential pressure at high flow rates. All sizes are built in two halves and are joined by a sanitary clamp ferrule according to DIN 32676 Series A.
SIZES
1/2 to 2 DN 10 to DN 50
CONNECTIONS
ASME BPE, DIN and ISO clamp ferrules
MAX. OPERATING PRESSURE
10 bar @ 200 ēC